Dead V2000!

My V2000 Triband (6M/2M/70cm) antenna developed high varying SWR!

After taking the antenna down and opening it up, I found where it was arcing over! (The black bit between the brass sleeves under the 5pF cap). Right in the middle of the antenna, near the joint in the outer fiberglass pole.

I de-soldered one end of the cap and pushed the longer brass sleeve to the left so that the gap between sleeves was about twice the original. I then scraped out the burnt fiberglass bits.

Resoldered the cap , the leads were long enough. Put it all back together and checked the SWR with my nano vna and IC7300 and it works great again.